What factors affect the use of inflatable boats

Release time:

2024-01-16 09:24

Source:

No matter how good the inflatable boat is, it will be damaged, especially the rubber boat material is easily damaged by sharp objects. In the process of use, many factors will affect the use of rubber boats, so we must pay attention to these points in the daily use process.

1, air leakage problem: rubber dinghy is a kind of inflatable products, gas is also the source of buoyancy, but also the whole ship is important. In order to improve the safety factor, each ship will design two or more than three independent air chambers to prevent the inflatable boat from being damaged, only the damaged air chamber will be missed, and other independent air chambers will not be affected. However, there is a key problem. There are many hundreds of inflatable boats on the market. Although this inflatable boat also has several independent air chambers, due to the very thin diaphragm used to separate the air chambers and the insufficient fusion and adhesion of the heat-closing machine, the internal diaphragm may have been squeezed and cracked by air pressure when we are full of air. At this time, the air flow in the independent air chambers is connected, and once there is a little damage, all the gas will leak, therefore, we must not think that there are several independent air chambers that are not afraid of damage. We must pay attention to the changes of the buoy at any time. As soon as we detect the softening of the air chamber, we must draw out dangerous waters for inspection. Bargains are of poor quality and have a poor safety factor.

2. Temperature difference: The temperature difference between the south and the north of China is relatively large, especially in the morning and at night. At noon, the sunshine time is long and the temperature is very high. Rubber boats that cut corners may be exposed to sun explosion at this high temperature, or at the bottom of the temperature, the inflatable boat material is relatively hard or may be broken and leak. Therefore, the inflatable fishing kayak should not be too full when the temperature is too high, so as to prevent the air chamber of the inflatable fishing kayak from bulging or bursting.

3. Weather: Ordinary hundreds of rubber dinghies have very weak ability to resist wind and waves, and their ability to resist wear and bump is relatively poor. You must know the weather when traveling, and pay attention to weather changes even when driving. It is easy to capsize when the wind and waves are strong.

Therefore, we must pay attention to the above problems when using inflatable boats to avoid damage to inflatable boats and protect the normal use of inflatable boats.

How to judge the quality of inflatable boat

Which boat is best for you?

Other dynamics

Disassembly and folding of inflatable boats

If the inflatable boat is not stored well after use, it will affect future use and may cause damage to the inflatable boat. Inflate the deck and then inflate the buoyancy tubes, and you can immediately take family and friends to fishing or sea rides. Inflatable boat is an inflatable boat, mostly made of rubber, so it is also called inflatable boat.

Daily Maintenance of FRP Inflatable Boat

Due to the glass fiber hull, commonly known as glass fiber reinforced plastic hull, the surface will lose its luster before leaving the factory after cruising, mooring in the dock and soaking in seawater for a long time, and it will also be contaminated with stolen goods, dust, sea baths, marine organisms and salt crystal layer left after evaporation of seawater splashed on the yacht. These substances will have certain destructive effect on the surface gel coat. After each use, fresh water should be used, if it is not used for a long time, it should be cleaned at least once a week. Cleaning should also be based on their own situation and the location of the water quality and choose the appropriate cleaning fluid.

Inflatable fishing boat rubber boat how to maintain

Some rubber dinghies with several hundred yuan on the Internet can be said to have broken down after several times of use. The material, thickness, bonding method, glue and workmanship of the inflatable fishing dinghies can last longer for military purposes, but they are too heavy. The main factor affecting the life of the rubber boat is ultraviolet light, debris in the water. Therefore, the main means to extend the life is to prevent ultraviolet rays and prevent some unnecessary friction.

What is the gas of an inflatable boat and how much air pressure is appropriate

Inflatable boat, also known as inflatable assault boat, is a kind of inflatable assault boat. When not in use, the gas will be released and preserved. What gas is the inflatable boat filled? In the past, the gas in inflatable boats was hydrogen, but because hydrogen has certain risks and risks of explosion, helium is used instead. Helium is a rare gas with smaller density than air and stable chemical properties. It is a safe gas. It is commonly used as protective gas in chemical experiments or factories. Of course, it is also possible to use ordinary air without affecting actual use.

How to judge the quality of inflatable boat

Nowadays, many people buy inflatable boats by themselves. Because they don't know about inflatable boats, they have been wondering whether the quality of the inflatable boats they buy is good. The following small series for everyone to introduce the evaluation method to judge the quality of inflatable boats:

What factors affect the use of inflatable boats